The model 300 is upgraded to the model 310 using a kit. Many of the 300 parts fit on the 310. The main differences are the drain pan switch, down-pipe (stand-pipe) assembly and the lower suction tube, which is a curved molded flexible pipe.
| Item No. | Part No. | Description | Qty. | Stocking Level |
|---|---|---|---|---|
| 1* | 140638 | Retrofit kit, model 300 to model 310 | 1 | B |
| 2 | 163795 | Retrofit drain switch bracket | 1 | |
| 3 | 163805 | Retrofit drain switch assembly | 1 | B |
| 4 | 163837 | Drain pan cover | 1 | B |
| 5 | 172505 | Downpipe hold bracket | 1 | |
| 6 | - | See Upper Standpipe Assembly | - | |
| 7 | 173056 | Suction tube | 1 | B |
| 8 | 19004 | Front caster, 2 in | 2 | B |
| 9 | 72490 | Manual oil discard pump | 1 | B |
| 10 | 77815 | Rear wheel, 8 in | 2 | B |
| 11 | 83994 | Hinge mounting bracket | 1 | |
| 12 | 182414 | Drain handle assembly | 1 | |
| 13 | 84383 | Drain pipe assembly | 1 | |
| 14* | LW01-010 | Split ring lockwasher, 3/8 in | 2 | |
| 15* | NS01-001 | Hex nut, 3/8 in X 16 | 2 | |
| 16 | NS02-002 | Keps nut, 1/4 in X 20 | 8 | |
| 17 | NS02-005 | Hex keps nut, 6 X 32 | 8 | |
| 18 | NS02-006 | Hex keps nut, 10 X 24 | 18 | |
| 19 | SC01-057 | Hex screw, 1/4 in X 20 X 1/2 in | 8 | |
| 20 | SC01-113 | Screw, 6 X 32 X 9/16 in | 4 | |
| 21* | SC03-001 | Screw, 10 X 1/2 in | 4 | |
| 22 | SC06-074 | Screw, 3/16 in X 1/2” X 1 1/2 in | 2 | |
| 23 | SC06-076 | Thumb screw, 8 X 25 black knob | 1 | |
| 24 | 89041 | Stud assembly adapter plate, F5 | 1 | |
| 25* | 84453 | Crumb basket | 1 | B |
| 26* | 84614 | Drain pan cover seal | 1 | |
| Recommended Parts: A = Truck Stock; B = Dist. Stock
* = Not Shown A/R = As Required |
||||
